200mm Motorized Gimbal Mirror Mount
MHDM-200
These motorized mirror mounts are designed to support extra-large mirrors and feature a motorized mechanism for remote-controlled tilt adjustment-ideal for high-precision optical alignments.
The mirror is axially clamped at three locations equally spaced around the perimeter to minimize wavefront distortion and accommodate mirrors of varying thicknesses. A coarse adjustment mechanism on the pitch axis allows manual positioning at any angle within a full 360-degree range before using the precision stepper motor actuators. The stepper motor actuators also are equiped wtih knobs to allow fine manual adjustment when they are not powered. The mount is compatible with both metric and inch-standard mirrors of similar sizes and can be easily switched using the included pin. For example, the MHDM-200 model can hold either a 200-mm diameter mirror or an 8-inch (203.2 mm) mirror. Note: Two D15D15A-CA-series cables are required for connection betwween the mount and the controller and also must be purchased separately along with a 2-axis controller.
Custom-sized automatic mirror mounts are also available upon request. Please contact our sales department for more information.
The mirror is secured at three locations around the circumference, making it possible to accommodate mirrors of various thicknesses.
A coarse adjustment mechanism is provided on the pitch axis, allowing the mirror to be rotated to any 360 deg. position.
The stepper motor actuators also are equiped wtih knobs to allow fine manual adjustment when they are not powered.
The mirror mount is compatible with both metric and inch standards with similar mirror sizes, and can be easily switched with the included pin.
| Nom | 200mm Motorized Gimbal Mirror Mount |
|---|---|
| Poids | 13.5000kgs |
| Guide |
|
| Attention |
|
| Angle Range | ±3.8° |
| Diameter | 200mm |
| Number of Control Axes | 2 axes |
| Compatible Optics Diameter | 200mm or 8-in. (3.7kgf max. weight) |
| Mirror Retention | Three Equally-Spaced Axial Clamps on Mirror's Circumference |
| Optical Axis Height | 180mm |
| Compatible Optics Thickness Range | 20 - 44mm |
| Motorized Adjustment Range, Pitch and Yaw | +/-3.8 deg. |
| Max. Angular Velocity | 1.7deg./sec |
| Pitch Axis Manual Adjustment Range | 360 deg. |
| Full-Step Resolution | about 3.1 arcsec |
| Half-Step Resolution | about 1.6 arcsec |
| Position Repeatability / Lost Motion | 180 arcsec |
| Stepper Motor Type | 5-Phase, 0.72-deg. motor step angle |
| Material and Finish | Aluminum with Black Anodize |
En stock
SKU
MHDM-200
Customize product
These motorized mirror mounts are designed to support extra-large mirrors and feature a motorized mechanism for remote-controlled tilt adjustment-ideal for high-precision optical alignments.
The mirror is axially clamped at three locations equally spaced around the perimeter to minimize wavefront distortion and accommodate mirrors of varying thicknesses. A coarse adjustment mechanism on the pitch axis allows manual positioning at any angle within a full 360-degree range before using the precision stepper motor actuators. The stepper motor actuators also are equiped wtih knobs to allow fine manual adjustment when they are not powered. The mount is compatible with both metric and inch-standard mirrors of similar sizes and can be easily switched using the included pin. For example, the MHDM-200 model can hold either a 200-mm diameter mirror or an 8-inch (203.2 mm) mirror. Note: Two D15D15A-CA-series cables are required for connection betwween the mount and the controller and also must be purchased separately along with a 2-axis controller.
Custom-sized automatic mirror mounts are also available upon request. Please contact our sales department for more information.
Resources & Downloads
Produits apparentés
Cochez les articles à ajouter au panier ou
