Select Website
AMERICA
    Select website

    Your location is set on :

    AMERICA


Search
Advanced Search
Cart
quotation icon My Quote

Contact us
+1-949-851-5881

Knife Edge Right Angle Prism 10mm λ/4 Protected Aluminum Coated

KRPB4-10-550

main product photo
The knife edge prism is polished to the sharp edges of the right angle surfaces and have no chamfers on these edges.
◦With knife edge prism having no coating (KRPB) by using light in the range of 0±5.7 degrees angle of incidence to the slope surface the total reflection critical angle is obtained.
More Information
Name Knife Edge Right Angle Prism 10mm λ/4 Protected Aluminum Coated
Weight 0.0050kgs
Standard Coatings Available No
Guide
  • Contact our Sales Division with your request for custom prisms not listed on our website or in the catalog.
Remark -
Attention
  • Knife-edge ridge right angle is very easily damaged so please carefully handled.
  • The knife edge will not be able to be cleaned with lens paper. Use an air blower to remove small dust particles.
  • A dimension measured is slightly shorter than the catalog size because it contains chamfer dimension. Dimensional tolerances are defined by the sides of the triangle with the slope and two bottom surface.
  • KRPB (with a no coat), the reflectance of the reflection above the critical angle is nearly 100%, there is a loss of about 8% in the reflection of the input and the exit surface of the prism.
  • Sometimes when dirt or fingerprints on the surface with no coating, total reflection will not happen anymore at the critical angle. Do not contact anything on the no coated surface.
Coating Protected Aluminum
Length 10mm
Material BK7
Material BK7 (Refractive index nd＝1.517)
Ridge Processing Right-angle ridge ; knike edge (Not chamfered) Other ridge ; Chamfered
Coating 2-surface that make up the right angle ; Al+MgF2 (Protected Aluminum)
Obliquity ; Uncoated
Laser Damage Threshold 0.25J/cm2
A＝B 10mm
Surface flatness of substrate λ/4
Angle tolerance (90°) ±1′
Angle tolerance (45°) ±1′
Surface Quality (Scratch-Dig) 40−20
In stock
SKU
KRPB4-10-550
$116.00

Delivery in : 2 weeks

custom product
Customize product
Add to Wish List
The knife edge prism is polished to the sharp edges of the right angle surfaces and have no chamfers on these edges.

Resources & Downloads