Reasonable Aluminum Flat Mirror 20mm 3mm Thick λ/10
S-TFA-20C03-10
An economic general use mirror suitable for an illumination optical system and a simple experiments. It has the same reflectance and surface flatness as our aluminum mirrors (TFA) designed for use with a laser, but lower surface quality.
◦The dirt on the surface of the mirror can be wiped because the scratch-resistant protection is coated on the aluminum coating.
◦Reflectance of less variation can be obtained in a wide wavelength range from visible to near-infrared.
◦Reflectance of less variation can be obtained in a wide wavelength range from visible to near-infrared.
Name | Reasonable Aluminum Flat Mirror 20mm 3mm Thick λ/10 |
---|---|
Gewicht | 0.0050kgs |
Standard Coatings Available | Nein |
Guide | - |
Remark | - |
Attention |
|
Image Label | Reasonable Aluminum Flat Mirror 20mm 3mm Thick λ/10 |
Diameter φD | 20mm |
Rear Surface | Ground |
Reflectance | Rave.>90% |
Material | BK7 |
Coating | Al+MgF2 |
Parallelism | <3′ |
Incident angle | 45° |
Laser Damage Threshold | 0.25J/cm2 (Laser pulse width ; 10ns , Repetition frequency ; 20Hz) |
Surface Quality (Scratch-Dig) | 60-40 |
Diameter φD | φ20mm |
Outer dimension A×B | - |
Thickness t | 3mm |
Surface Flatness | λ/10 |
Rear surface | Ground |
Auf Lager
SKU
S-TFA-20C03-10
16,50 €
An economic general use mirror suitable for an illumination optical system and a simple experiments. It has the same reflectance and surface flatness as our aluminum mirrors (TFA) designed for use with a laser, but lower surface quality.