Polarizing Plate Beamsplitter 20mm Diameter 532nm
PBS-20C03-10-532
Plate polarizing beamsplitters are a plate that is coated with a polarizing coating.
◦Plate polarizing beamsplitters transmit p-polarization and reflect s-polarization as the monochromatic beam entering is at Brewster’s angle.
◦The losses of input beam of these products are minimized because of no absorption of dielectric coating.
◦Coating characteristic are not influenced marginally by temperature change.
◦The losses of input beam of these products are minimized because of no absorption of dielectric coating.
◦Coating characteristic are not influenced marginally by temperature change.
| Name | Polarizing Plate Beamsplitter 20mm Diameter 532nm |
|---|---|
| Gewicht | 0.0050kgs |
| Standard Coatings Available | Nein |
| Guide |
|
| Remark | - |
| Attention |
|
| Design wavelength | 532nm |
| Image Label | Polarizing Plate Beamsplitter 20mm Diameter 532nm |
| Diameter φD | 20mm |
| Material | BK7 |
| Material | BK7 |
| Surface flatness | λ/10 |
| Extinction ratio of transmission | Ts：Tp＝1：200 |
| Parallelism | ＜5″ |
| Coating |
Front surface ; Dielectric multilayer coating Rear surfaces ; Uncoated |
| Surface Quality (Scratch-Dig) | 10−5 |
| Clear aperture | 90% of the diameter |
| Wavelength range | 532nm |
| Diameter φD | φ20mm |
| Maximum diameter of transmitted beam | 9.9mm |
| Incident angle | 56.6 ° |
| transmittance of P polarized light | ＞95% |
| Reflectance of S polarized light | ＞98% |
| Laser Damage Threshold<sup>*</sup> | 5J/cm2 |
| Availability | Please contact |
Auf Lager
SKU
PBS-20C03-10-532
206,00 €
Customize product
Plate polarizing beamsplitters are a plate that is coated with a polarizing coating.
