Polarizing Beamsplitter Cube 10mm 780nm
PBS-10-7800
Polarizing beamsplitters consist of two right angle prisms. One of them is coated with dielectric multi-layer polarizing coating on the hypotenuse face. Polarizing beamsplitters split a monochromatic beam entering at zero degree into p-polarization as transmitted and s-polarization as reflected.
◦Four surfaces of the cube are coated with narrowband multi-layer anti-reflection coatings.
◦The losses of input beam of these products are minimized because of no absorption of the dielectric coatings.
◦For cube beamsplitters, unlike plate beamsplitters, beam deviations of transmitted beams and ghosts rarely occur.
◦The losses of input beam of these products are minimized because of no absorption of the dielectric coatings.
◦For cube beamsplitters, unlike plate beamsplitters, beam deviations of transmitted beams and ghosts rarely occur.
Name | Polarizing Beamsplitter Cube 10mm 780nm |
---|---|
Gewicht | 0.0050kgs |
Standard Coatings Available | Nein |
Guide |
|
Remark | - |
Attention |
|
Design wavelength | 780nm |
Image Label | Polarizing Beamsplitter Cube 10mm 780nm |
Length | 10mm |
Material | BK7 |
Surface flatness of substrate | λ/4 |
Angular deviation of transmitted beam | <10′ |
Coating |
Hypotenuse surface ; Dielectric multilayer coating Four surfaces ; Multilayer antireflection coating |
Incident angle | 0° |
Transmittance of P polarized light | >97%( PBS-4050 ; >90%) |
Extinction ratio of transmission | Ts:Tp=1:1000 |
Laser Damage Threshold | 0.3J/cm2 (Laser pulse width ; 10ns , Repetition frequency ; 20Hz) |
Surface Quality (Scratch-Dig) | 20-10 |
Wavelength range | 780nm |
A=B=C | 10mm |
Reflectance of S polarized light | >98% |
Auf Lager
SKU
PBS-10-7800
239,50 €
Polarizing beamsplitters consist of two right angle prisms. One of them is coated with dielectric multi-layer polarizing coating on the hypotenuse face. Polarizing beamsplitters split a monochromatic beam entering at zero degree into p-polarization as transmitted and s-polarization as reflected.