Laser Line Mirror 50mm Diameter 8mm Thick 193nm Wavelength
TFM-50C08-193
These laser mirrors are designed for specific wavelength laser applications where low wavefront distortion, low scattering and high reflectivity are usually important. These narrowband reflectors are for several wavelengths and sizes.
◦Dielectric multi-layer coating does not have absorption like Aluminum coatings and provide higher than 99% reflectance except some mirrors for UV wavelength use are provide 95% reflectance.
◦These coatings are much harder and provide higher laser damage threshold than Al+MgF2 coating.
◦These coatings are much harder and provide higher laser damage threshold than Al+MgF2 coating.
| Name | Laser Line Mirror 50mm Diameter 8mm Thick 193nm Wavelength |
|---|---|
| Gewicht | 0.0400kgs |
| Standard Coatings Available | Nein |
| Guide |
|
| Remark | - |
| Attention |
|
| Design wavelength | 193nm |
| Diameter φD | 50mm |
| Reflectance | ＞95.0% |
| Material | BK7 |
| Coating | Dielectric multi-layer coating |
| Incident angle | 45°±3° |
| Surface flatness | λ/10 |
| Parallelism | ＜3′ |
| Surface Quality (Scratch-Dig) | 10−5 |
| Wavelength Range | 193nm |
| Diameter φD | φ50mm |
| Thickness t | 8mm |
| Reflectance | ＞95.0% |
| Laser Damage Threshold<sup>*</sup> | 0.8J/cm2 |
| Rear surface | Polished |
| Availability | From stock |
Auf Lager
SKU
TFM-50C08-193
382,70 €
Customize product
These laser mirrors are designed for specific wavelength laser applications where low wavefront distortion, low scattering and high reflectivity are usually important. These narrowband reflectors are for several wavelengths and sizes.
