Laser Focusing Holder for FC
FOPT-FC
The adjustable collimator holder can be used to collimate the output of an optical fiber of FC or SMA type connector
◦These holders can adjust the divergence, outgoing direction, and center position of the luminance distribution (fiber rotation and tilt) of a beam.
◦The objective lens included with this holder has a short focal length (OBL-10-A) so that collimated light with small beam diameter can be obtained.
◦The objective lenses used in these holders are standard microscope objectives so that high transmittance and high performance (spherical aberration) can be obtained in the visible light range.
◦When used with a single-mode fiber, the output beam will have a Gaussian distribution.
◦The objective lens included with this holder has a short focal length (OBL-10-A) so that collimated light with small beam diameter can be obtained.
◦The objective lenses used in these holders are standard microscope objectives so that high transmittance and high performance (spherical aberration) can be obtained in the visible light range.
◦When used with a single-mode fiber, the output beam will have a Gaussian distribution.
| Name | Laser Focusing Holder for FC |
|---|---|
| Gewicht | 0.5500kgs |
| Guide |
|
| Attention |
|
| Image Label | Laser Focusing Holder for FC |
| Compatible Connector | FC |
| Focal length Objectives Lens | 16.6mm |
| Centering Adjustment Range | ±1mm |
| Focus Adjustment Range | ±5mm |
| Fiber Adjustment <br>Range<br>(Tilt ･ Rotation) | ±2° |
| Holder Adjustment <br>Range<br>(Tilt) | ±2.5° |
| Centering Adjustment <br>Resolution | 0.5mm/rotation |
| Fiber Adjustment <br>Resolution (Tilt) | about 0.7°/rotation |
| Fiber Adjustment <br>Resolution (Rotation) | about 0.7°/rotation |
| Holder Adjustment <br>Resolution (Tilt) | about 0.53°/rotation |
Auf Lager
SKU
FOPT-FC
905,10 €
Customize product
The adjustable collimator holder can be used to collimate the output of an optical fiber of FC or SMA type connector
