50.8mm Clear Edge Mirror Mount, High-Resolution, Right-Side Open

MHM-50.8-R

MHM mounts have an open, c-shaped frame providing clear access to the edge of the mirror. A precision 100μm thread pitch (~250TPI) adjustment screw introduces high resolutions. It is thinner than MHG mounts.

Details

Weitere Informationen

Weitere Informationen
Name	50.8mm Clear Edge Mirror Mount, High-Resolution, Right-Side Open
Gewicht	0.1040kgs
Guide	MHG-NL mirror holders can have locking mechanisms for adjustments screws. (WEB Reference Catalog Code/W4001) These holders can be mounted on separate post holders or M6 threaded posts.
Attention	The threaded hole for posts is offset from the center of the mirror reflective surface. These holders can not be used for installation on an optical bench at 45 degrees incidence. Only mirrors without and offset can be used for this application (MHI). (WEB Reference Catalog Code/W4102) The rotation center for fine adjustment is not along the center of the mirror reflective surface. If fine adjustment is required, please us gimbal mirror holders (MHAN). Gimbal mirror holders have fine adjustments along the center of the mirror reflective surface. (WEB Reference Catalog Code/W4010)
Image Label	High Precision Kinematic Mirror Mounts
Angle Range	±3°
Diameter	50.8mm
Type	Right-Side Open
Mounting Thread	8-32/M4 Thru
Compatible Optics Diameter	φ50, φ50.8mm
Compatible Optics Thickness	5 - 9mm
45 ° incident crossbeam	φ24.1mm (Optics condition; thickness 5 mm, refractive index 1.52)
Though hole	φ47mm
Number of Adjustment Axes	2 points
Adjustment Range /Tilt	±3°
Adjustment Range /Rotation	±3°
Resolution /Tilt	about 0.1°/rotation
Resolution /Rotation	about 0.1°/rotation

Auf Lager

SKU

MHM-50.8-R

141,40 €

50.8mm Clear Edge Mirror Mount, High-Resolution, Right-Side Open

Resources & Downloads