Enhanced Aluminum Mirror 25.4mm Diameter Wavelength Range 170 - 400nm

TFAE-25.4C05-10

This is a vapor-deposited aluminum flat mirror with the substrate polished with high accuracy, designed for high reflectivity at any incident angle.

Details

◦With four types to choose from; (TFAN/TFAQN) which is coated with aluminum only, (TFA/TFAQ) which is coated with a protective coating against accidental hard scratches, (TFAE) which is coated aluminum and a protective coating to increase the reflectance of ultraviolet and lastly, (OPBA/OPSQA) which provides Aluminum with protective coat on the optical parallel substrate.
◦For ultraviolet, visible and near-infrared light applications.
◦For low thermal expansion mirrors, we have (TFAQ/TFAQN) which is made of Synthetic fused silica that provides high rigidity and high precision surface quality.

Weitere Informationen

Weitere Informationen
Name	Enhanced Aluminum Mirror 25.4mm Diameter Wavelength Range 170 - 400nm
Gewicht	0.0070kgs
Standard Coatings Available	Nein
Guide	If you need a higher reflectance aluminum mirror, please kindly contact us. Should you require a surface accuracy analysis/data, please kindly contact our sales group. For non-standard sizes other than those listed in the product table, please kindly contact us. Pyrex® is a registered trademark of Corning Inc.
Remark	-
Attention	For aluminum mirrors without a protective film, (TFAN/TFAQN) handle carefully as they can be easily scratched oxidation builds up in the surface. Do not rub the surface with paper or cloth as this will harm the surface. For long term storage, use a de-oxidizer to prevent the oxidation. When a laser light is transmitted with multiple mirrors installed there will be a large amount of light loss due to the absorption of the aluminum coating. Please consider using dielectric multi-layer mirrors (TFM) for improved performance. The reflectance specification are represented by the average of the reflectance of P polarized light and S polarized light. Reflectance may vary depending on the polarization state of the incident beam.
Diameter φD	25.4mm
Material	BK7
Rear Surface	Polished
Reflectance	Rave.＞85%
Material	BK7
Coating	Aluminum+Dielectric multilayer coating
Parallelism	＜3′
Incident angle	45°
Laser Damage Threshold	0.25J/cm²
Surface Quality (Scratch-Dig)	40-20
Wavelength Range	170 - 400nm
Reflectance	Rave.＞85%
Diameter φD	φ25.4mm
Thickness t	5mm
Surface Flatness	λ/10
Rear surface	Polished

Auf Lager

SKU

TFAE-25.4C05-10

94,30 €

This is a vapor-deposited aluminum flat mirror with the substrate polished with high accuracy, designed for high reflectivity at any incident angle.