Dielectric Cube Beamsplitter 20mm 1:2 R/T Ratio
CSM33-20-550
Cube beamsplitters with dielectric multi-layer coated on the hypotenuse face of a 45° right angle prism. Divides beams at reflected light (R): transmission light (T) ratio of 1:2 or 1:3.
◦Anti-reflection coating (AR coat) is applied to the incident and outgoing faces.
◦The dielectric multi-layer films has virtually zero light absorption and very low light intensity loss. However, transmittance and reflectance may change according to wavelength, polarization and incident angles.
◦In contrast to plate type half mirrors, cube mirrors have no ghosting or transmission optical path deviation.
◦The dielectric multi-layer films has virtually zero light absorption and very low light intensity loss. However, transmittance and reflectance may change according to wavelength, polarization and incident angles.
◦In contrast to plate type half mirrors, cube mirrors have no ghosting or transmission optical path deviation.
| Name | Dielectric Cube Beamsplitter 20mm 1:2 R/T Ratio |
|---|---|
| Gewicht | 0.0200kgs |
| Standard Coatings Available | Nein |
| Guide |
|
| Remark | - |
| Attention |
|
| Design wavelength | 400 - 700nm |
| Image Label | Dielectric Cube Beamsplitter 20mm 1:2 R/T Ratio |
| Length | 20mm |
| Reflectance : Transmittance | 1:2 |
| Material | BK7 |
| Surface flatness of substrate | λ/4 |
| Wavelength Range | 400 - 700nm |
| Beam Deviation | ＜5′ |
| Coating |
Hypotenuse surface ; Dielectric multilayer coating Rear surfaces ; Multilayer antireflection coating |
| Incident angle | 0° |
| Polarization of the incident | Unpolarized light or 45-degrees Linear polarization or Circular polarization |
| Laser Damage Threshold | 0.3J/cm2 (Laser pulse width ; 10ns , Repetition frequency ; 20Hz) |
| Surface Quality <br> (Scratch-Dig) | 10-20 |
| Reflectance : Transmittance | 1：2 |
| A＝B＝C | 20mm |
| Transmittance at 550nm <sup>*</sup> | 67±5% |
| Transmittance at 400・700nm <sup>*</sup> | ＜80% |
| Availability | Please contact |
Auf Lager
SKU
CSM33-20-550
250,80 €
Customize product
Cube beamsplitters with dielectric multi-layer coated on the hypotenuse face of a 45° right angle prism. Divides beams at reflected light (R): transmission light (T) ratio of 1:2 or 1:3.
