Cage Rod Pitch Conversion Plate
C32-RPCP-P32-P16
An adapter plate to convert P30 (Dia. 6mm rods, 30mm pitch between the rods) system into P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ Four dedicated rods are used in the cage system to attach various kinds of components along the optical axis.
There are three types of cage system available. Two types uses dedicated rod of dia. 6mm. One of them is P30 mm corner arrangement (C30 series) and another one is P60 mm corner arrangement (C60 series).
In addition, the one uses a dedicated rod of dia. 4mm is available for P16 mm corner arrangement to miniaturize.
◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system.
There are three types of cage system available. Two types uses dedicated rod of dia. 6mm. One of them is P30 mm corner arrangement (C30 series) and another one is P60 mm corner arrangement (C60 series).
In addition, the one uses a dedicated rod of dia. 4mm is available for P16 mm corner arrangement to miniaturize.
◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system.
| Name | Cage Rod Pitch Conversion Plate |
|---|---|
| Gewicht | 0.0320kgs |
| Guide |
▶Please contact our Sales for methods to fix the cage system to other equipment and parts not included in the WEB catalog. ▶For consultation of optical system using cage system please contact Sales. |
| Attention |
▶If the rod is tightened too tightly or if the tightening force is greatly different depending on the location, the rod may not fit in other holders. ▶Initially fix the rod lightly, after building the optical system, please tighten so that the force that fixes the rod is even in each holder. ▶When configuring a large optical system or a long optical system, it may become distorted or become unstable due to vibration. |
| Primary material | Aluminum |
| Guide Rod Diameter (Spaceing between rod) | φ6mm （32x32mm）/φ4mm （16x16mm） |
| Mounting Screw Size (Aperture Diameter) | M13.55 P0.75 |
Nicht lieferbar
SKU
C32-RPCP-P32-P16
45,87 €
Customize product
An adapter plate to convert P30 (Dia. 6mm rods, 30mm pitch between the rods) system into P16 (Dia. 4mm rods, 16mm pitch between the rods).
